The Binks SMART pumps use a standard EExd 4 pole AC electric motor to drive the fluid section, for pumping paints, solvents and other suitable material
The unit combines conventional electrical hardware to achieve optimum operating performance at a lower cost. Running costs are much lower than compressed air driven models. When used with an optional smart card even higher savings in running cost can be realised, by running in a open or closed loop mode which delivers the paint to the user point at the correct pressure and volume only when needed.
The Binks SMART Electric Pump achieves a reciprocating drive by using a cam and cam followers combined with a sliding carriage unit. Equal thrust on each stroke together with the special cam profile reduces fluid pressure fluctuations to an absolute minimum.
Models available are:
E2-15
E2-30
E2-40
E2-60
E4-60
Download Brochure (E2-15 Pump)
Download Brochure (E2-30 Pump)
Download Brochure (E2-40 Pump)
The three-stage desiccant unit provides the ultimate in clean, dry air. First stage centrifugal filter removes particulates to 5 microns. Stage two coalescer filters down to .01 micron. Third stage desiccant removes …
DeVilbiss Compliant Atomisation Technology. High Performance front end technology with removable/replaceable baffle & air cap retaining threads. New radial clamping device with quick release cam operation…
Faster application rates of high viscosity materials. Robust, Lightweight and work friendly design for High Demand outputs. Renowned DeVilbiss Atomisation Quality. Conventional and Compliant spray guns.
Sending...