The Binks SMART pumps use a standard EExd 4 pole AC electric motor to drive the fluid section, for pumping paints, solvents and other suitable material
The unit combines conventional electrical hardware to achieve optimum operating performance at a lower cost. Running costs are much lower than compressed air driven models. When used with an optional smart card even higher savings in running cost can be realised, by running in a open or closed loop mode which delivers the paint to the user point at the correct pressure and volume only when needed.
The Binks SMART Electric Pump achieves a reciprocating drive by using a cam and cam followers combined with a sliding carriage unit. Equal thrust on each stroke together with the special cam profile reduces fluid pressure fluctuations to an absolute minimum.
Models available are:
E2-15
E2-30
E2-40
E2-60
E4-60
Download Brochure (E2-15 Pump)
Download Brochure (E2-30 Pump)
Download Brochure (E2-40 Pump)
Unique Trans-Tech or HVLP air caps provide a ?Softer fine spray? for superior finish quality and higher transfer efficiency than competitors. Lightweight and Operator friendly design with lighter trigger pull tension. Easy to remove…
Aluminium alloy body with brass air nozzle. Stainless steel needle valve and springs. Both spray gun operation and spray pattern variation is controlled from a single air supply. Control valves for atomisation fan and air flow…
The three-stage desiccant unit provides the ultimate in clean, dry air. First stage centrifugal filter removes particulates to 5 microns. Stage two coalescer filters down to .01 micron. Third stage desiccant removes …
Sending...